Technical Specification

---

Power usage:

• +12V:

  • 255mA typical, no USB or microSD card connected
  • 265mA typical while accessing included microSD card
  • 280mA typical with USB 3.0 thumb drive attached
  • With common USB MIDI controllers attached:
    • 275mA with Arturia MicroLab
    • 280mA with Arturia MiniLab 2
    • 290mA with Arturia MiniLab 3
    • 290mA with Keith McMillen QuNexus
    • 300mA with Novation Launch Control XL
    • 360mA with Arturia Beat Step Pro
    • 495mA theoretical maximum with USB MIDI controller connected

• -12V: 24mA

• +5V: not used

Dimensions

• Width: 26HP (5.2" = 132mm)
• Height: 5.059" = 128.5mm
• Clearance required under panel with power cable installed: 25mm

USB

• USB-C jack
• USB Host for mass-storage drives (aka "USB flash drive", "thumb drive", "jump drive", "memory stick", "USB stick")
  • Compatible with USB 2.0 and 3.0 speeds
• USB Host for MIDI devices
  • Supplies up to 500mA of power at +5V

microSD Card Slot

• microSD Card Slot
  • Compatible with all standard speed classes: C2, C4, C6, C10, U1, U3.
  • Uses UHS-I bus, but compatible with UHS-II bus cards